Falling Film Evaporator
Falling film evaporators are designed by ISTPPL with special care to meet a wide variety of specifications and duties of the final products. Having installed number of units worldwide during the last decade, ISTPPL has acquired substantial experience and knowhow to comply with customer requirements.
Special Features :
1)Liquid to be boiled enters at the top of the exchanger.
2)An internal distributor ensures the tubes are equally wetted.
3)Gentle Evaporation with Short residence time in the evaporator.
4)The liquid forms a Film along the inside of the tube and therefore not flooded.
5)Fluid boils as it passes down the tubes.
6)Vapour leaves at bottom of the exchanger at 90 degrees, while the liquid leaves at the bottom.
7)May be operated with steam at 135oC or 2.1 kg/cm2
8)Can work under Lower temp drop
9)No need of supporting staging structure
10)Less contact time of the liquid Multiple Effect Arrangement Provide Steam Economy.
2)An internal distributor ensures the tubes are equally wetted.
3)Gentle Evaporation with Short residence time in the evaporator.
4)The liquid forms a Film along the inside of the tube and therefore not flooded.
5)Fluid boils as it passes down the tubes.
6)Vapour leaves at bottom of the exchanger at 90 degrees, while the liquid leaves at the bottom.
7)May be operated with steam at 135oC or 2.1 kg/cm2
8)Can work under Lower temp drop
9)No need of supporting staging structure
10)Less contact time of the liquid Multiple Effect Arrangement Provide Steam Economy.
Falling Film Evaporator
- Delivery Time : 1 Week
- Supply Ability : 1 Per Month
Share Your Product: